Pixsys ATR241 - 6. Configuration; 6.1 Modify Configuration Parameters

16
6.Configuration
6.1 Modify configuration parameters
See point 7 for the complete list of parameters
Press Display Do
1
Press for
5 seconds
Display 1 visualizes
and the 1
st
digit flashes.
Display 2 visualizes
2
or
Modify the first digit
and press to
reach the next digit
Enter password
3
Press
to confirm
The code of 1
st
parameter is
visualized on
display 1, second
display visualizes
value of parameter
4
or
Scroll parameters
list
5
+
o
Increase or
decrease visualized
value pressing first
then one of
the arrow keys
Enter new value, which
will be automatically
stored releasing the
keys.
To modify another
parameter go back to
point 4
6
+
togheter
Exit configuration
mode