BM-500 Bandwidth Management Gateway User’s Manual
- 3 -
1.5 Specification
Product Bandwidth Management Gateway
Model BM-500
Hardware
WAN 1 x 10/100Base-TX Connections
LAN 4 x 10/100Base-TX, Auto-MDI/MDI-X
Button Reset button fro hardware reset / factory default
System LED System: PWR, STATUS
Network: LNK/ACT, 100
Power 5V DC, 2.4A
Operating Environment Temperature: 0~50°C
Relative Humidity: 5%~90%
Dimension W x D x H 220 x 149 x 37 mm
Regulatory FCC, CE Mark
Software
Maximum Bandwidth Transparent: 10Mbps
NAT: 8Mbps
NAT + logging + statistics: 3Mbps
Maximum concurrent
session
5000
Management Web (English, Traditional Chinese, Simplified Chinese )
Operation Mode Transparent, NAT
WAN connection type in NAT
mode
PPPoE, DHCP and Fixed IP
Traffic Classification IP, IP subnet, TCP/UDP port
Bandwidth Allocation Policy rules with Inbound/Outbound traffic management
Guaranteed and maximum bandwidth
Scheduled in unit of 30 minutes
3 Priorities
Log Traffic Log, Event Log, Connection Log, Log backup by mail or syslog
server
Statistics WAN port statistics and policy statistics with graph display
Firewall Security Policy-based access control
Stateful Packet Inspection (SPI)
Scheduled in unit of 30 minutes
Hacker Alert Detect SYN Attack, Detect ICMP Flood, Detect UDP Flood, Detect Ping
of Death Attack, Detect Tear Drop Attack, Detect IP Spoofing Attack,
Filter IP Route Option, Detect Port Scan Attack, Detect Land Attack
Alarm w Traffic alarm for user-defined traffic level
w Event alarm for hacker attack
w The alarm message can sent to administrator by e-mail
Other Functions Firmware Upgradeable through Web
NTP support
Configuration Backup and Restore through Web
Dynamic DNS support
Multiple NAT and multiple DMZ ( mapped IP) support
Multiple server load balancing
To Next Page
Loading...
