6
is more than enough for those network applications with Fast Ethernet speed
transmission. The eight 802.3af/at PoE ports feature PoE power injector function
which is able to drive 8 IEEE 802.3at compliant powered devices. The FGSD-
1011HP also offers a simple, costeffective and nonblocking wirespeed performance.
It comes with a 9-inch metal compact housing, suitable for desktop deployment in
SOHO ofce or department network application.
The mini-GBIC slot built in the FGSD-1011HP supports SFP auto-detection and
dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-
factor Pluggable) ber-optic modules, meaning the administrator now can exibly
choose the suitable SFP transceiver according to the transmission distance or the
transmission speed required to extend the network efciently.
1.3 Features
Physical Port
z 8 10/100Mbps Fast Ethernet ports
z 1 10/100/1000BASE-T Gigabit Ethernet port
z 1 1000BASE-X mini-GBIC SFP interface
Power over Ethernet
z Complies with IEEE 802.3af/at Power over Ethernet end-span
z Up to 8 IEEE 802.3af/at devices powered
z Supports PoE Power up to 30 watts for each PoE port
z 120-watt PoE budget
z 8 ports support 52V DC power to PoE powered device (Port 1 to port 8)
z Hardware DIP switch for “Standard”, “VLAN” and “Extend” mode selection; the
“Extend” mode features 30-watt PoE transmit distance of 250m at speed of
10Mbps and VLAN isolation
z Auto detects powered device (PD)
z Circuit protection prevents power interference between ports
z Remote power feeding up to 100m in standard mode
Switching
z Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
z Flow control for full duplex operation and back pressure for half duplex opera-
tion
z Integrates address look-up engine, supporting 4K absolute MAC addresses
z Automatic address learning and address aging
z Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP
spoong
To Next Page
Loading...
Need help?
General