Command Guide
-205-
Usage Guide:
To enable HTTPs WebUI.
Example:
To enable HTTPs WebUI.
Switch# configure terminal
Switch (config)# ip http secure-server
4.2.78 ip igmp host-proxy
Command:
ip igmp host-proxy
ip Internet Protocol
igmp Internet Group Management Protocol
host-proxy IGMP proxy configuration
Default:
Disabled
Usage Guide:
To enable IGMP Proxy
Example:
To enable IGMP Proxy.
Switch# configure terminal
Switch (config)# ip igmp host-proxy
4.2.79 ip igmp host-proxy leave-proxy
Command:
ip igmp host-proxy leave-proxy
ip Internet Protocol
igmp Internet Group Management Protocol
host-proxy IGMP proxy configuration
leave-proxy IGMP proxy for leave configuration
To Next Page
Loading...
Need help?
General