Command Guide
-354-
4.21.13 show erps
Command:
show erps [ <groups> ] [ detail | statistics ]
show Show running system information
erps Ethernet Ring Protection Switching
<groups> Zero or more ERPS group numbers
detail Show detailed information
statistics Show statistics
Default:
N/A
Usage Guide:
To display the ERPS group information.
Example:
To display the ERPS group 1 detailed information.
Switch # show erps 1 detail
Grp# Port 0 Port 1 RPL:Role Port Blocking
1 Gi 1/1 Gi 1/2 - - -
Protected VLANS:
None
Protection Group State :Active
Port 0 SF MEP :1
Port 1 SF MEP :2
Port 0 APS MEP :1
Port 1 APS MEP :2
WTR Timeout :1
WTB Timeout :5500
Hold-Off Timeout :0
Guard Timeout :500
Node Type :Major
Reversion :Revertive
Version :2
ERPSv2 Administrative Command :None
FSM State :PENDING
Port 0 Link Status :Link Up
Port 1 Link Status :Link Up
Port 0 Block Status :BLOCKED
To Next Page
Loading...
Need help?
General