To Next Page

To Previous Page

Command Guide

-352-

4.21.11 show dot1x status

Command:

show dot1x status [ interface ( <port_type> [ <v_port_type_list> ] ) ] [ brief ]

show Show running system information

dot1x IEEE Standard for port-based Network Access Control

status Shows dot1x status, such as admin state, port state and last source.

interface Interface

brief Show status in a brief format

Default:

N/A

Usage Guide:

To display the IEEE 802.1X status.

Example:

To display the All of IEEE 802.1X status for brief.

Switch # show dot1x status

GigabitEthernet 1/1 :

---------------------

Admin State Port State Last Source Last ID

------------------ --------------------- ----------------- -------------

Force Authorized Globally Disabled - -

Current Radius QOS Current Radius VLAN Current Guest VLAN

-------------------- -------------------- --------------------

- - -

GigabitEthernet 1/2 :