Planet IGS-801M User Manual

11
5. Resetting the Switch to Default
To reset the IP address to the default IP Address “192.168.0.100” and the
user password to factory default mode (default password is sw + the last 6
characters of the MAC ID in lowercase), press the hardware-based reset button
on the side panel for about 10 seconds.
After the device is rebooted, you can log in the management Web interface
within the same subnet of 192.168.0.xx and default password. Be noted that
all the previous setups will be disappeared after the factory default reset is
made.
RESET

Planet IGS-801M Specifications

General

Brand	Planet
Model	IGS-801M
Category	Network Router
Language	English