Need help?Do you have a question about the Planet MH-3400 and is the answer not in the manual?
General| DMZ | Yes |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Security | WEP, WPA, WPA2 |
| Firewall Protection | SPI Firewall |
| VPN Protocols | IPSec, PPTP, L2TP |
| Wireless Standards | 802.11b/g/n |
Step-by-step guide for setting up the VPN router, covering installation to logout.
Illustrates network connection diagrams for the VPN router setup.
Instructions on how to access the router's web-based user interface.
Displays the main status page with router parameters and status.
Shows current IP configuration, gateway, DNS, and bandwidth usage for WAN ports.
Details the status of all physical ports on the device.
Provides device IP, serial number, firmware version, and current time.
Displays the status of enabled firewall features and rules.
Shows the current status of VPN tunnels and their configurations.
How to change router login credentials and system time settings.
Basic network settings for internet connectivity.
Configure local area network IP address and subnet mask.
Configure WAN interfaces and Demilitarized Zone (DMZ) settings.
Settings for managing multiple WAN connections.
Configure how traffic is distributed across multiple WAN connections.
System for detecting network service status and failover.
Assign specific protocols or IPs to specific WAN interfaces.
View an overview of all configured VPN tunnels and their status.
Set up new VPN tunnels for secure network connections.
Configure VPN tunnels between two network gateways.
Configure VPN tunnels for individual clients to connect to the gateway.
Configure Point-to-Point Tunneling Protocol (PPTP) VPN connections.
Update the router's firmware to the latest version.
Backup and restore router configuration settings.
To Next Page