Gigabit Multi-Homing VPN Security Router User’s Manual
Chapter 11: Advanced Function
37B11.1 DMZ Host/ Port Range Forwarding
11.1.1 DMZ Host
When the NAT mode is activated, sometimes users may need to use applications that do not support virtual
IP addresses such as network games. We recommend that users map the device actual WAN IP addresses
directly to the Intranet virtual IP addresses, as follows:
If the “DMZ Host” function is selected, to cancel this function, users must input "0” in the following “DMZ
Private IP”. This function will then be closed. After the changes are completed, click “Apply” to save the
network configuration modification, or click “Cancel" to leave without making any changes.
- 108 -
To Next Page
Loading...
Need help?
General
