13
¢ Per 10/100Base-TX Port
LED Color Function
Link / ACT Green
Light
Indicate the link through that port is
successfully established at 10 or 100Mbps.
Blink
Indicate that the Switch is actively
sending or receiving data over that port.
¢ Per 100Base-FX Port
LED Color Function
Link / ACT Green
Light
Indicate the link through that port is
successfully established at 100Mbps.
Blink
Indicate that the Switch is actively
sending or receiving data over that port.
¢ PoE Port
LED Color Function
PoE In Use Orange
Indicate the port is providing 48V DC in-line
power. (1-4 ports)
2.1.3 Switch Upper Panel
The upper panel of the Industrial Fast Ethernet Switch consist one
terminal block connector within two DC power inputs. Figure 2-4 shows
the upper panel of the Industrial Fast Ethernet Switch.
PWR1
DC 24V/48V
V1- V1+ V2- V2+
Fault
PWR2
Input
Figure 2-4 Industrial Fast Ethernet Switch upper Panel.
To Next Page
Loading...
