1.3 Product Features
Physical Port
Model Name
Ports Fiber Optical Interface
Copper Optical Mode Connector Distance
ISW-504PT
5 x 10 /
100Base-TX
NA NA NA NA
ISW-514PT
4 x 10 /
100Base-TX
1 x
100Base-FX
Multi-Mode SC 2km
ISW-514PT15 Single-Mode SC 15km
ISW-514PTF
Optional SFP
Module
LC
Depend on
SFP Module
IEEE 802.3af PoE
® Comply with IEEE 802.3af Power over Ethernet End-Span PSE
® Up to 4 IEEE 802.3af devices powered
® Support PoE Power up to 15.4 Watts for each PoE port
® Auto detect powered device (PD)
® Circuit protection prevent power interference between ports
® Remote power feeding up to 100m
Layer 2 Features
® Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX /
100Base-FX Ethernet standard
® Supports Auto-Negotiation, 10/100Mbps Half / Full Duplex and
Auto MDI/MDI-X
® High performance Store and Forward architecture, Runt/CRC
ltering eliminates erroneous packets to optimize the network
bandwidth
® Prevents packet loss with Back Pressure (Half-Duplex) and IEEE
802.3x PAUSE Frame Flow Control (Full-Duplex)
® Backplane (Switching Fabric): 1Gbps
® Automatic address learning and address aging
To Next Page
Loading...
Need help?
General