Planet MGSW-28240F Command Guide

Command Guide
-225-
4.2.103.5 exec-timeout
Command:
exec-timeout <0-1440>
exec-timeout Set the EXEC timeout
<0-1440> Timeout in minutes
Default:
N/A
Usage Guide:
To configure EXEC timeout
Example:
To configure EXEC timeout (10 minutes)
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# exec-timeout 10
4.2.103.6 exec-timeout
Command:
exec-timeout <0-1440>
exec-timeout Set the EXEC timeout
<0-1440> Timeout in minutes
Default:
N/A
Usage Guide:
To configure EXEC timeout
Example:
To configure EXEC timeout (10 minutes)
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# exec-timeout 10

Planet MGSW-28240F Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	56 Gbps
MAC Address Table	8K
Jumbo Frame	Up to 9K bytes
Weight	2.5 kg
Uplink Ports	4 x 1G SFP
Power Supply	Internal power supply, 100-240V AC, 50/60Hz
Power Consumption	20W
Operating Temperature	0 to 50 °C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Dimensions (W x D x H)	440 x 200 x 44 mm
Switch Architecture	Store-and-Forward