Planet MGSW-28240F Command Guide

Command Guide
-74-
Switch# configure terminal
Switch (config)# enable password admin
Press ENTER to get started
Username:
Password:
> enable
Password: *****
#
4.2.37 enable password level
Command:
enable password level <1-15> <WORD>
<1-15> Level number
<WORD> The UNENCRYPTED (cleartext) password.
Default:
Disable
Usage Guide:
To configure enable password and specific level for user
Example:
To configure enable password(admin) and specific level(15) for user
Switch# configure terminal
Switch (config)# enable password level 15 admin
Press ENTER to get started
Username:
Password:
> enable
Password: admin
#

Planet MGSW-28240F Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	56 Gbps
MAC Address Table	8K
Jumbo Frame	Up to 9K bytes
Weight	2.5 kg
Uplink Ports	4 x 1G SFP
Power Supply	Internal power supply, 100-240V AC, 50/60Hz
Power Consumption	20W
Operating Temperature	0 to 50 °C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Dimensions (W x D x H)	440 x 200 x 44 mm
Switch Architecture	Store-and-Forward