Planet MGSW-28240F Command Guide

Command Guide
-249-
Switch# configure terminal
Switch (config)# mep 2 lb 1 dei count 10 size 64 interval 100
4.2.135 mep <Instance> lck
Command:
mep <Instance> lck fr1m | fr1s
mep Maintenance Entity Point
<Instance> The MEP instance number.
lck Locked Signal
fr1m Frame rate is 1 f/min.
fr1s Frame rate is 1 f/s.
Default:
1 frame/sec
Usage Guide:
To configure Locked Frame Rate of MEP.
Example:
To configure Locked Frame Rate (1 frame/sec) of MEP 2.
Switch# configure terminal
Switch (config)# mep 2 lck
Switch (config)# mep 2 lck fr1s
4.2.136 mep <Instance> level
Command:
mep <Instance> level <Level : 0-7>
mep Maintenance Entity Point
<Instance> The MEP instance number.
level The MEG level of the MEP
<Level : 0-7> The MEG level value
Default:
0

Planet MGSW-28240F Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	56 Gbps
MAC Address Table	8K
Jumbo Frame	Up to 9K bytes
Weight	2.5 kg
Uplink Ports	4 x 1G SFP
Power Supply	Internal power supply, 100-240V AC, 50/60Hz
Power Consumption	20W
Operating Temperature	0 to 50 °C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Dimensions (W x D x H)	440 x 200 x 44 mm
Switch Architecture	Store-and-Forward