Planet NVR-E6480 - Add Camera Manually; Configure Camera Settings

16
2.7 Add Camera Manually
If you are adding a camera located in another network, use “Add Camera
Manually”. Fill in Media Type, Protocol, IP Address, HTTP Port, Account and
Password. Finally, click “Get Device Settings” and then “Apply”.
2.8 CongureCameraSettings
1. Go to the Setup page and then the Devices tab. Choose the camera from the
Camera List.
2. Select Basic, Video, PTZ,orBtabtocongurerelatedsettings.
3. Click “Apply” to save the settings.