Planet VF-101G-KIT - 3.5 Optional DIN-rail Installation

19
(3) Attach a rack-mount bracket to each side of the Converter
Chassis with supplied screws attached to the package.
(4) After the brackets are attached to the Converter Chassis,
use suitable screws to securely attach the brackets to the
rack.
(5) Connect the video and ber cabling, and supply power to
your Converter Chassis.
3.5 Optional DIN-rail Installation
There are two DIN-rail holes on the left side of the
VF-101G/102G/106G-T or VF-101G/102G/106G-R that
allows the converter to be easily installed with DIN-rail
mounting. PLANET optional DIN-rail mounting kit – RKE-DIN
– can be ordered separately. When the wall mount application
needs to be replaced with the DIN-rail application for the
VF-101G/102G/106G-T or VF-101G/102G/106G-R, please refer
to the following gures to attach the DIN-rail to the converter.
To hang the VF-101G/102G/106G-T or VF-101G/102G/106G-R
on the DIN-rail, follow the steps below:
(1) Screw the DIN-rail on the VF-101G/102G/106G-T or
VF-101G/102G/106G-R.