User Manual of WNAP-6315
-62-
The page includes the following fields:
Object Description
Encryption
You can disable the encryption or select WEP, WPA2, and WPA-Mixed as the
encryption method to your wireless network.
802.1x Authentication
Enable 802.1x authentication function and then enter the IP Address, Port,
and Password of the Radius Server.
RADIU Server IP
Address
Enter the RADIUS server host IP address.
RADIU Server Port
Set the UDP port used in the authentication protocol of the RADIUS server.
(Range: 1024-65535; Default: 1812)
RADIU Server
Password
A shared text string used to encrypt messages between the access point and
the RADIUS server. Be sure that the same text string is specified on the
RADIUS server. Do not use blank spaces in the string.
Enter a shared secret/password between 1 and 99 characters in length.
5.4.4 Access Control
Choose menu “Wireless Access Control” to allow or deny the computer of specified MAC address to
connect with the WNAP-6315 on this page. After the configuration, please click the “Apply Changes” button to
save the settings.
Figure 5-43 Wireless Access Control
To Next Page
Loading...
Need help?
General
