EasyManua.ls Logo

Planet WS-1032P - Page 13

Planet WS-1032P
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 5-5.
WS-1032P#congure terminal
WS-1032P(cong)#interface vlan 1
WS-1032P(cong-if-vlan)#ip address 192.168.1.101 255.255.255.0
The previous command would apply the following settings for the AP Managed
Switch.
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Figure 5-5 IP Address Screen
4.RepeatStep1tocheckiftheIPaddressischanged.