Planet WS-1032P - 6 Recovering Back To Default Configuration

15
6.RecoveringBacktoDefaultConguration
 IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.1.100” or reset the
login password to default value, press the hardware-based reset button on the
front panel for about 10 seconds.Afterthe device is rebooted, you can log in the
managementWebinterfacewithinthesamesubnetof192.168.1.xx.
4 6 82
1 3 5 7
9
10G SFP+
10
9
Reset
Console
115200,N,8,1
LNK/ACT1G/2.5G
LNK/ACT10G
10
Reset Button
Figure 6-1 Reset button of WS-1032P
115200, N, 8, 1
Console
2
1
4
3
SYS
AC
DC
Ring
Reset
ACT1000 LNK
ACT10/100 LNK
bt PoE
af/at PoE
Smart LCD
WS-2864PVR
Reset Button
Figure 6-2 Reset button of WS-2864PVR