BASICS
Installation ................................... 2
Location ....................................... 3
Headset/Handset Mode ............... 3
Placing and Receiving a Call
Using Headset .......................... 4
Placing and Receiving a Call
Using Handset .......................... 4
FEATURES
Out of Range Warning .................. 5
Low Battery Warning ................... 5
Recharging Headset .................... 6
Replacing Battery ........................ 6
OPTIONS
Optional Handset Lifter Use ........ 7
IntelliStand™ Function ................ 8
Switching to Handset ................... 8
TROUBLESHOOTING ..... 9
TECHNICAL SUPPORT 11
SUBSCRIPTION .............. 12
SYSTEM RESET ............. 13
MAINTENANCE ............... 13
REPLACEMENT PARTS
& OPTIONAL
ACCESSORIES ............ 14
WELCOME
This Product Information Booklet contains information not
described in the Quick Start Guide* (QSG). Refer to the QSG for
CS50/55 Wireless Office Headset System installation and safety
information.
* This Product Information Booklet and Quick Start Guide
are available online at www.plantronics.com/documentation.
BASICS
LOCATION
Do not position the CS50/55 system near other electronic equipment.
Incorrect positioning can cause problems with noise or interference.
HEADSET/HANDSET MODE
Pressing the talk button 14 * on the headset selects
headset mode. The talk indicator 2 on the base unit
will illuminate green and the talk indicator light 17
on the headset will also illuminate when in headset
mode. Both of the indicators are off when in handset
mode.
* Callouts are identified in the components section
of the QSG.
INSTALLATION
Please install the CS50/55 Wireless Office Headset System in accordance with the
instructions detailed in the QSG.
TIP
You can conserve headset battery
power and extend the remaining
available talk time by pressing
the talk button immediately on
conclusion of the call.
To Next Page
Loading...
Need help?
General
