Plantronics CS55 Product Information

8
9
INTELLISTAND™ FUNCTION
When the CS50/55 Wireless Office headset System is used in
conjunction with a Plantronics Telephone Handset Lifter, you can
enable the IntelliStand feature.
The IntelliStand senses when the headset has been removed from
or placed in the CS50/55 base unit, automatically activating the
lifter and enabling headset/handset mode to answer or end a call.
The IntelliStand feature is disabled (off) when the IntelliStand
switch 10 is in the up position (-) or enabled (on) when the switch
is in the down position (=).
SWITCHING FROM HEADSET TO HANDSET
WHEN USING THE HANDSET LIFTER
If during a call, you are using your headset and want to switch to the telephone
handset, remove the handset from the handset lifter. Then press the talk button on
your headset. The handset lifter will lower and you will then be able to continue the
call using the handset.
SWITCHING FROM HANDSET TO HEADSET
WHEN USING THE HANDSET LIFTER
If during a call, you are using the telephone handset and want to switch to your
headset, press the talk button on the headset. The handset lifter will raise and you will
be able to continue the call using your headset.
Place the telephone handset on the handset lifter. When the call is finished, press the
talk button on your headset. The handset lifter will lower the handset and end the call.
SYMPTOM SUGGESTION
I cannot hear caller/dial tone. • Check that all cords and jacks are connected
correctly.
• Check that the base has power (power
indicator 3 is red) and the headset battery
is fully charged.
• Try other telephone configuration dial
4 settings on the base unit. Ensure the
selected number is directly in line with the
horizontal position indicator. See Step 4.4
in the QSG.
• Ensure you are in headset mode. Press the
talk button to select correct mode. The talk
indicator light 2 on the base is on (green).
• Select another listen volume master 11
setting on the base.
Callers cannot hear me. • Try other telephone configuration dial 4
settings on the base unit. Ensure the
selected number is directly in line with the
horizontal position indicator. See Step 4.4 in
the QSG.
• Increase the speak volume fine tune 13 on
the base unit.
If the volume is still too low, increase the
speak volume master setting 12 on the
bottom of the base unit.
• Check that the mute function is off. See Step
5.3 in the QSG.
TROUBLESHOOTING
OFF
ON
* Callouts are identified in
the components section
of the QSG.

Plantronics CS55 Specifications

General

Rechargeable battery	Yes
Compatibility	Telephone
Charging time	180 min
Wireless range	91.44 m
Connectivity technology	Wireless
Headset type	Monaural
Product type	Headset
Product color	Black, Silver
Recommended usage	Office/Call center
Microphone type	Boom