Plusmed pM-100 fasTTest - About the plusmed fasTTest Test Strip

66
About the plusmed fasTTest Test Strip
The plusmed fasTTest Test Strip is used to perform
the blood glucose test in conjunction with the
plusmed fasTTest Meter.
Each strip can be used only once.
The Test Strip consists of the following parts:
1. Conrmation Window
This is where you can conrm that enough blood has
been applied to the target area.
2. Target Area
This is where blood is drawn into the Test Strip.
3. Contact Bar
This end of the Test Strip is inserted into the Test Port
to activate the Meter. (white side face up).
3
1
2