86
Transfer Test Results to a Computer
With the plusmed fasTTest Blood Glucose Monitoring System, it is easy to transfer
test results to your personal computer. Follow these simple instructions:
1. Obtain the required software and cable
For downloading the software please call our central technical service or visit website of
www.trimpeks.com
2. Install the software on your computer
Installation instructions will be provided with the software.
3. Get ready to transfer test results
Connect the interface cable to a serial port on your computer. Then con
nect the other end of interface cable to the data port located on the side
of the meter with the meter turned off. “PC” will appear on the display,
indicating that the meter is in the communication mode.
4. Transfer data
Follow the instructions provided in the software to download the results from the
meter. After nishing the data transfer, press M button to turn off the meter.
Note: While in the communication mode, you will be unable to perform a blood
glucose test. If the meter is not in the PC link mode, it will not respond to com-
puter commands.
To Next Page
Loading...