Plusmed pM-100 fasTTest - High Alarm Setting; Low Alarm Setting; High Glucose Level Detected

89
DISPLAY WHAT IT MEANS ACTION
Indicate the result is HIGHER
than the “HI alarm setting” of
the health management.
For your reference or you
can change the default
setting value 180 mg/dL ac-
cording to page 69-72.
Indicate the result is LOWER
than the “LO alarm setting” of
the health management.
For your reference or you can
change the default setting
value 70 mg/dL according to
page 69-72.
Meter detects blood glucose
level is higher than 600 mg/
dL (33.3 mmol/L).
Indicates high blood glucose
level. Repeat test. If result still
occurs, consult your physi-
cian immediately.