Plusmed pM-100 fasTTest - Other Problems and Solutions; Test Strip Insertion Issues; Defective Test Strip; Insufficient Blood Sample

94
Other problems that may occur
Action
The Test Strip has not been inserted
into the meter properly.
Review the instructions and re-insert the
Test Strip correctly (white side face up).
Replace with a new Test Strip.
Repeat the test with new Test Strip.
Meter will automatically turn-off. Re-
insert the Test Strip to the test port.
Contact our central technical service
Defective Test Strip.
Insufcient blood sample.
Test Strip remains in the test port for
more than 3 minutes prior to testing.
LCD display on the meter is blank when
trying to perform a test.