EasyManua.ls Logo

Plusmed pM-TE01 - Inserting and Changing Batteries

Plusmed pM-TE01
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Inserting/Changing the Batteries
1. Open the battery compartment at the back of the device by pushing the battery cover labelled
“Open” downward (this area features raised marks for easy identication).
2. Insert 3 AAA (1.5 V) batteries in the battery compartment; make sure to match up the symbols
7(+/–).
3. Close the battery cover by carefully placing the stud into the slot in the rear area and sliding it
upward, applying slight pressure.
4. Follow the same procedure when replacing the battery at a later date
Note : for important precautions regarding the batteries ,please be informed:
Always use only 3x1.5V(AAA) batteries.
Keep away from children.
Do not recharge.
Do not short-circuit.
Do not throw into a re.
Please recycle. Do not dispose of old batteries with your household waste; dispose of them
safely at your recycling centre or business where the batteries were purchased.

Other manuals for Plusmed pM-TE01