38
Connecting the Cable to The Device
Connecting the lead wire to the electrodes before applying to the Skin.
Turning On the Device
1. Press and hold the ON+ button for one (1) second to turn on the device.
2. The most recently selected treatment time and program will ash when the unit is turned on.
NOTE: Do not turn the unit on until all electrodes and lead wires are properly attached.
NOTE: When stimulating the muscles of the arms or legs bear in mind that the muscle contraction
may cause involuntary limb movement which could cause injury to you or others. Always ensure
the limb is secured to prevent movement.
TENS
EMS
To Next Page
Loading...
