EasyManua.ls Logo

Plusmed pM-TE01 - Care and Maintenance Instructions; Stimulator Care; Cable Care; Electrode Handling

Plusmed pM-TE01
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
CARE AND MAINTENANCE
Stimulator
The stimulator may be wiped clean with a small amount of soapy water on a clean cloth. Do not
submerge the stimulator in liquids or expose it to large amounts of water
Never use aggressive cleaning products of stiff brushes to clean the device.
Remove the batter before cleaning the device.
Do no use the device again until it is completely dry.
Do not expose the device to direct sunlight and protect it from dirt and moisture.
Cables
Disconnect the cables from the stimulator and electrodes.
Do not pull on the cables, but on the connectors attached to the ends of the cables.
Store the stimulator with the cables in a clean, dry place.
Electrode
The electrode pads are disposable and use an adhesive that will dry after prolonged usage or
storage. Pads should bereplaced when they lose their adhesive quality, or you sense a change in
stimulation sensation.
All accessories are provided by Trimpeks.
How to Store Your System
1. Store your System at room temperature in a dry place, out of the reach of children.
2. If the stimulator will not be used for more than a week, remove the battery from the stimulator

Other manuals for Plusmed pM-TE01