50
TROUBLE SHOOTING
Always check the unit and accessories before use to prevent damage and defects; these are some of
the simple checks:
1. Make sure the battery has sufcient charge and is not corroded.
2. Make sure the cables t tightly into the connection sockets of the device. The table below shows
some common defects. If you cannot remedy the defects as described, contact your unit provider if it
is not possible to remedy in the manner described.
Defect Cause Remedy
The device does not
turn on
No battery or bad battery Replace battery
The device turns on
and then off again
Battery not inserted
properly
Insert battery
again Replace battery
Battery life expired Replace battery
The device turns on,
but does not generate
electric pulses
Cable broken Replace cable
Cable not connected Properly Connect cable properly
Treatment time has
Expired
Switch unit to the OFF
Position and switch back on.
The unit does not turn on even
though new batteries have
been inserted
Yetkili servisi arayınız
To Next Page
Loading...
