EasyManua.ls Logo

Plusmed pM-TE01 - Technical Specifications and Warranty; Technical Specifications; Warranty Information

Plusmed pM-TE01
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
PM-TE01 STIMULATOR TECHNICAL SPECIFICATIONS
Channel : Dual, isolated between channels.
Pulse Amplitude : Adjustable 0 – 80mA. (±10%) (1.3mArms/max.)
Pulse Rate : As pre-programming operation mode.
Sinyal Genişliği : As pre-programming operation mode.
Software ramp up feature: Pulse width ramp up when change mode.
Timer : 5~60 min. selectable.
LCD : Show modes, pulse rate, pulse width, timer, CH1/CH2, intensity level.
Wave Form : Symmetrical Bi-Phasic square pulse.
Max Charge per Pulse:20.8 micro-coulombs maximum.
Operation altitude : 3000m.
Ürün Ömrü : Tens & Ems Device 3 years, pads 2 years.
Atmospheric pressure range: from 80kPa to 101,3kPa
Power Source : 3 x AAA / 4.5 Volt batteries
All electrical specications are ±10% at 500Ω load.
Warranty
This Plusmed Min Patch carries a one-year warranty from the date of purchase.
Product expected service Life Three-year.
The warranty does not apply to damage resulting from failure to follow the operating instructions,
accidents, abuse, alterations or disassembly by unauthorized individuals.
The warranty applies to the main device and necessary parts and labor relating thereto.
Battery, electrodes, and other accessories are warranted to be free from defects in workmanship
and materials at the time of delivery.
The distributors reserve the right to replace or repair the unit at their discretion.

Other manuals for Plusmed pM-TE01