0.00.124 PMDG 737NGX
TUTORIAL #2
27FEB15 RTM DO NOT DUPLICATE For Simulator Use Only
SHUTDOWN PROCEDURE
Set the parking brake either by clicking the handle on the
pedestal.
Set both APU generator bus switches to on.
Verify that the GEN OFF BUS lights for the engine driven
generators are lit and the APU GEN OFF BUS light is
extinguished – the plane is now receiving its electrical power
solely from the APU generators.
On the pedestal view, move both engine start levers below the
throttles to the cutoff position (down) by left clicking them.
This is the action that actually shuts down the engines.
To Next Page
Loading...