0.00.36 PMDG 737NGX
TUTORIAL #2
27FEB15 RTM DO NOT DUPLICATE For Simulator Use Only
Again if you’re using weather, these entries are explained in the
addendum.
Enter 3000 into the TRANS ALT field at LSK 5R, which is
EHAM’s transition altitude.
The completed PERF INIT page should look like this:
Press the illuminated EXEC button to execute the performance
data.
Notice that we now get a USING RSV FUEL message in the
scratchpad – this means that we’d be below our current 5000lb
(2268kg) reserves limit on arrival to Innsbruck if we took off with
our current fuel load. We would be forced to divert or declare an
emergency – not good!
Clear the USING RSV FUEL message with the CDU’s CLR key.
Let’s take care of the fuel planning situation now to resolve this.
To Next Page
Loading...