EasyManua.ls Logo

PMT TT3 - Menu Item Set Filter; Menu Item Baud Rate

PMT TT3
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VAT: NL 80 66 34 984 B01
Bank account no.: Rabobank 16 01 00 046
Chamber of commerce 27 16 95 41
IBAN Code: NL95 RABO
0160100046
T. 31 (0) 10 522 43 73
F. 31 (0) 10 521 19 41
www.tamson.com
info@tamson.com
P.M. Tamson Instruments bv
van 't Hoffstraat 12
2665 JL Bleiswijk
THE NETHERLANDS
Tamson Instruments bv
Page
10
/
22
Thermometer man.docx Rev 1.02 UK “23
Replace the battery pack when after a full charge the
thermometer can not be used for more than 8 hours
Charging will take approximately 2 .. 2,5 hrs.
When fully charged, the red charging LED will switch off
7.2.8 Menu Item “Set Filter“
The filter can be averaged using a mathematical moving
average. The settings between brackets are the number of
mathematical points. Seven settings options are possible:
No [0]
Weak [36]
Very low [72]
Standard [144]
Medium [108]
Plus [180]
Strong [216]
Max [255]
This value influences the time response. For a fast time
response a filter can be best set to “Weak”.
A reading of [0] will be very nervous.
For a more stable reading a filter can be best set to
“standard [144]”
7.2.9 Menu Item “Baud Rate”
There are two baud rates available
19.200
57.600