PMT TT3 - Memory and Logging; Memory; Start Logging Temperature Data

VAT: NL 80 66 34 984 B01
Bank account no.: Rabobank 16 01 00 046
Chamber of commerce 27 16 95 41
IBAN Code: NL95 RABO
0160100046
T. 31 (0) 10 522 43 73
F. 31 (0) 10 521 19 41
www.tamson.com
info@tamson.com
P.M. Tamson Instruments bv
van 't Hoffstraat 12
2665 JL Bleiswijk
THE NETHERLANDS
Tamson Instruments bv
Page
16
/
22
Thermometer man.docx Rev 1.02 UK “23
10 Memory and logging
10.1 Memory
The thermometer can save up to 16 sessions.
A session can run until memory is full.
The thermometer will stop logging data
The session is ended when memory is full
10.2 Start logging temperature data
A session can be started or stopped from the menu “Logging”
Press 2 times and select “logging
Press 2 time to select “Start log #”
Where # is the session which becomes active
Press to start logging
Aboard logging menu
Wait for six seconds
Chose No logging and confirm with
When logging is active info is displayed on the 2
nd
line:
M# L#
Where
M is percentage memory filled with data
L is active session
When logging is active (L#) the logging must be stopped
first in order to be able to switch off the thermometer
Total Memory
The memory can use up to 32.000 measuring points