2 General description
2.1 General description
Introduction
The air dryers described in this book are heatless adsorption dryers, built to remove moisture from
compressed air for industrial purposes. The standard version is intended to reach a pressure dew point
(PDP) of -40 ˚F. There is also a version available for a pressure dew point of -100 ˚F.
All dryers are designed for indoor use.
The dryers described in this book are equipped with a smart controller. A Pressure Dew Point (PDP) sensor
can be installed with a sales kit.
Main parts
A general overview of the main parts of the dryer units is given in below images:
Front view PH 230 HE up to PH 635 HE
Instruction book
8 2920 1891 00
To Next Page
Loading...
