Pneumercator LC1000 SERIES - Page 9

LC1000 INSTRUCTION MANUAL PRODUCT DESCRIPTION
PAGE 9
WARNING
Do not drill or modify enclosure. Use only conduit entries provided. FAILURE TO
COMPLY WILL VOID WARRANTY AND MAY PRESENT A SAFETY HAZARD
RESULTING IN PERSONAL INJURY, PROPERTY LOSS AND EQUIPMENT
DAMAGE.
WARNING
Conduit entries must only be used for their designated purpose in order to
assure safe operation and to maintain safety certification. FAILURE TO COMPLY
WILL VOID WARRANTY AND MAY PRESENT A SAFETY HAZARD RESULTING IN
PERSONAL INJURY, PROPERTY LOSS AND EQUIPMENT DAMAGE.
Figure 1-4 - LC1000 Conduit Usage
DRAWING NO. 20055 REV.
A
NON-INTRINSICALLY SAFE
CONDUIT OPENINGS AND
DESIGNATED USES:
1
/2" NPT CONDUIT SIZE *
LC1001 OR LC1002:
B1 = POWER AND RELAY OUTPUTS
LC1003 OR LC1004:
D
1=RELAYOUTPUTS
D
2 = POWER AND RELAY OUTPUT S
1/2" NPT CONDUIT SIZE *
LC1001 OR LC1002:
A1 = EARTH GROUNDS & I.S. INPUTS
LC1003 OR LC1004:
C1 = I.S. INPU TS
C2 = EARTH GROUNDS & I.S. INPUTS
INTRINSICALLY SAFE
CONDUIT OPENINGS AND
DESIGNATED USES:
*OREQUIVALENT
C1 C2
A1 B1
D1 D2
MODELS
LC1001 OR LC1002
MODELS
LC1003 OR LC1004