Getting Started 20
CONNECTING TO THE INTERNET
The Device can be connected to the Internet using
Wi-Fi networks. If you open an application, which requires
Internet access (e.g. Browser, PocketNews) the Device will
open a list of available Wi-Fi connections. If the network
you select is protected, you will be suggested to enter net-
work key using the on-screen keyboard.
You can pre-configure a connection and set an automatic
connection. To proceed, follow these steps:
1. Go to Settings > Network > Network Access
2. Select On for the Network access checkbox and
then further settings appear: Automatic connection, Con-
nection to a hidden network, and a list of available Wi-Fi
networks.
NOTE If there are no available networks or the signal strength is
week, Available networks are not displayed and instead replaced
by Scanning — searching for available networks.
To Next Page
Loading...
