Settings 54
Network access — on or off. After network access
activation, the following settings appear:
• Auto connection on or off.
• Connection to hidden networks — Read more in
the Connecting to the Internet section of this manual
• Available Networks — a list of available networks.
Choose one of them and you’ll see parameters of this
connection: Network name (SSID), signal strength, security,
IP-address, network mask, main gateway, DNS.
NOTE If Scanning is displayed instead of Available Networks, it
means that Device is searching for available networks.
DATE/TIME
In this section you will be able to set date, time, time zone
and clock format. You can also Synchronize Time or set
Auto Time Sync to use the network time/date.
To Next Page
Loading...
