Getting Started 22
Also, Wi-Fi connection can be enabled/disabled by clicking
the icon on the notification panel. If a known network
is available, the connection is established automatically,
otherwise - opens a list of available networks.
Advanced Settings
If it is needed to configure network settings manually se-
lect Settings > Wi-Fi, go to the selected network and click
More… at the bottom of the screen:
• You can change IP address configuration:
• DHCP — get IP address automatically (if DHCP
server is configured);
• Manual (for skilled users) — enter networks
parameters manually from the on-screen keyboard.
• If the network you need to connect to has a proxy
server, you can specify its parameters in Proxy configura-
tion section.
To Next Page
Loading...
