Triggering Modes
Modes of Operation
Your Plus III Transceiver supports six modes of triggering for different
applications. You can switch between modes by pressing and quickly releasing
the MODE button.
TxRx Mode allows the radio to be used as a transmitter
attached to a camera or as a receiver connected to a remote
ash or remote camera. It automatically switches between
transmit and receive. This is the default mode.
Tx ONLY Mode disables all receiving (Rx) functionality
and allows you to use your Plus III as a transmitter only.
Use this mode when sharing remote ashes with other
photographers. This mode will prevent the other
photographer from triggering the Plus III on your camera.
Rx ONLY Mode disables all transmit (Tx) functionality
allowing you to use your Plus III radios as receivers for
remote ashes or remote cameras. Use this mode when
you do not want a remote Plus III to perform relay functions
when mounted in the shoe of a remote camera, or to prevent
a remote Plus III from triggering other radios when its TEST
button is pressed.
LR (Long Range) Mode doubles the maximum range of
a radio in a given shooting environment. Long Range Mode
must be enabled on both transmitting and receiving
99
To Next Page
Loading...
