To Next PageTo Next Page
Need help?Do you have a question about the PocketWizard PLUS III and is the answer not in the manual?
General| Interface | USB |
|---|---|
| Product color | Black |
| USB connector type | Mini-USB B |
| Maximum operating distance | 500 m |
| Cables included | Audio (3.5mm) |
Weight and Dimensions| Width | 51 mm |
|---|---|
| Height | 133 mm |
| Weight | 120 g |
| Dimensions (WxDxH) | 51 x 32 x 133 mm |
Introduces the Plus III transceiver, its frequency bands, and basic capabilities for wireless triggering.
Identifies and describes the main physical parts and controls of the Plus III transceiver.
Provides critical instructions to follow before operating the PocketWizard Plus III for the first time.
Details the various ports like Flash/Camera, USB, and mounting options on the Plus III transceiver.
Lists all the items included in the PocketWizard Plus III package.
Explains the indicators and information displayed on the Plus III transceiver's LCD screen.
Provides guidance on battery types and usage, and notes on turning off equipment.
Guides on how to connect the Plus III to cameras and remote flashes for wireless triggering.
Instructions on how to turn the Plus III transceiver on/off and set channels/zones.
Step-by-step instructions for setting up and triggering remote flashes wirelessly using the Plus III.
Advises users to visit PocketWizard.com/support/cable_finder to find the correct sync cable.
Provides instructions on how to trigger a remote camera wirelessly using the Plus III transceiver.
Explains how half-pressing the TEST button can pre-release the camera or engage autofocus.
Details the steps to set up and use the Auto-Relay Mode for triggering remote flashes with a remote camera.
Describes the TxRx (default), Tx ONLY, and Rx ONLY modes for different transmission/reception scenarios.
Explains the LR mode for extended range operation, requiring enablement on both units.
Details the RP (Repeater) and HSR (High Speed Receive) modes for extended range and faster FPS.
Explains the 32 standard channels and how they enable selective triggering of PocketWizard radios.
Describes how to use Zones A, B, C, and D for selective triggering of flashes or cameras on channels 17-32.
Explains the functionality of the Test button and the meaning of the Status LED colors.
Details the procedure to reset the Plus III transceiver back to its default settings.
Provides advice on radio placement, orientation, and avoiding interference for optimal signal reception.
Lists essential technical specifications of the PocketWizard Plus III, including frequency, power, and operating conditions.
Details the product's compliance with CE directives and RoHS standards.
Outlines the two-year limited manufacturer's warranty and how to register the product.
States that information is subject to change and directs users to wiki.PocketWizard.com for current details.
Details FCC warnings, compliance with Part 15 rules, and measures to correct interference.
Lists the FCC and IC ID numbers for the Plus III transceiver.
