point 3 Series - How to Use Your Induction Hob

Select a heat setting by touching the “-”
or “+” control.
• If you don’t choose a heat setting
within 1 minute, the Induction hob will
automatically switch o. You will need
to start again at step 1.
• You can modify the heat setting at any
time during cooking.
14
Always lift pans o the Induction hob – do not slide, or they may scratch
the glass.
Touch the ON/OFF control. After power
on, the buzzer beeps once, all displays
show “–” or “– –”, indicating that the
induction hob has entered the state of
standby mode.
Place a suitable pan on the cooking zone
that you wish to use.
• Make sure the bottom of the pan and
the surface of the cooking zone are
clean and dry.
HOW TO USE
Start cooking