point 3 Series - Page 18

18
Set the time by touching the “-” or “+”
control of the timer
Hint: Touch the “-” or “+” control of the
timer
once to decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of
the timer to decrease or increase by 10
minutes.
Touching the “-” and “+” together, the
timer is cancelled, and the “00” will
show in the minute display.
When the time is set, it will begin to
count down immediately. The display will
show the remaining time and the timer
indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the
timer indicator shows “- -” when the
setting time finished.
Make sure the cooktop is turned on.
Note: you can use the minute minder at
least one zone shall be active.
Touch the controls of the timer. The
minder indicator will start flashing and
“10” will show in the timer display.
a) Using the Timer as a Minute Minder.
If you are not selecting any cooking zone.