Touching the "Boost" control to cancel
the Boost function, then the cooking
zone will revert to its original setting.
OR
Touching the slider control, then the
cooking zone will revert to the level you
select.
16
Touching the heating zone selection
control that you wish to cancel the
boost function
OR
Cancel the Boost function
The function can work in all cooking zones
• The cooking zone returns to its original setting after 5 minutes.
• As the boost function of 1st cooking zone is activated, the 2nd cooking
zone is limited under level 2 automatically. Vice versa
• If the original heat setting equals 0, it will return to 15 after 5 minutes.
• This area can be used as a single zone or as two different zones,
according to the cooking needs anytime.
• Flexible area is made of two independent inductors that can be
controlled separately. When working as a single zone, a cookware is
moved from one zone to the other one within the flexible area keeping
the same power level of the zone where the cookware originally was
placed, and the part that is not covered by cookware is automatically
switched off.
• Important: Make sure to place the cookwares centered on the single
cooking zone. In case of big pot, oval, rectangular and elongated pans
make sure to place the pans centered on the cooking zone covering both
logos.
Flexible Area
To Next Page
Loading...
