20
Set one zone
Set the time by touching the slider
control. (e.g. 6)
Touch timer control again, the “1”
will flash.
Set the time by touching the slider
control (e.g.9), now the timer you set
is 96 minutes.
Buzzer will beep for 30 seconds and the
timer indicator shows “00” when the
setting time finished.
When the time is set, it will begin to count down immediately.
The display will show the remaining time
b) Setting the timer to turn one or more cooking zones o
Touching the heating zone selection
control that you want to set the timer
for.
Touch timer control, the “10” will show
in the timer display and the “0” flashes.
To Next Page
Loading...
