Rel. 03
9
CAP. 4 INSTALLATION
4.1 MACHINE DISPLACEMENT
The machine must be lifted and transported only by a lifting truck or a forklift whose
forks are to be inserted under the base. See the following picture Use extreme
caution when lifting of relocating the machine so as to avoid any possible danger
due to sudden movements, which could provoke damage to people or objects. The
weight of the machine is cited on the identification plate attached to the side of the
machine itself.
4.2 MACHINE PLACING
The position of the machine must be performed on a firm surface suited to carry the weight of the
machine, any differences in level must be in line with building regulations. If the machine must be
placed on a mezzanine (upper floor) the supporting slab must be adapted to the weight of the
machine. Place the machine in an expedient position, according to operational requirements,
putting it where it’s easier to reach an electric line and near a connector for shaving suction. Place
the machine in a place where there’s enough light to guarantee the sight of each part of the
machine.
To Next Page
Loading...