point Vitap - Chapter 8.1 Working Cycle

Rel. 03
2
MACHINE SWITCH ON
CHAPTER 6.1
CHECK OUT OR CHANGE OF SOFTWARE
EQUIPPING
CHAPTER 7.1
DRAWING CREATION OR CHANGE
CHAPTER 7.3
FAILURES SIGNALLING RESETTING
CHAPTER 7.2
OPENING, CREATION, CHANGE AND
START
JOBLIST
CHAPTER 7.3
POSSIBLE FAILURES SIGNALLING
CHAPTER 8.1
WORKING CYCLE
CHAP
TER 6
CHAPTER 7
INSTRUCTIONS MANUAL’S
Rel. 03
WORKING CYCLE