Rel. 03
3
INDEX
CHAPT 1 GENERAL INFORMATIONS
1.1. Introduction
1.2. General instructions
1.3. Forward of documentation
CHAPT 2 TECHNICAL FEATURES
2.1. Machine description
2.2. Reference Rules
2.3. Technical data
2.4. Machine set up
CHAPT 3 SAFETY
3.1. General safety rules
CHAPT 4 INSTALLATION
4.1. Machine displacement
4.2. Machine positioning
4.3. Assembly of dismantled parts
4.4. Instructions for electrical connection
4.5. Instructions for pneumatic connection
4.6. Instructions connecting intake system
CHAPT 5 CONTROL AND SAFETY
DEVICES
5.1. Control devices
5.2. Emergency and protection stops
USEFUL INFORMATION
CHAPT 6 MACHINE EQUIPPING
6.1. Tools replacement
6.2. Mobile positioning shoulder
6.3. Filter group adjustment
MACHINE
EQUIPPING
CHAPT 7 SOFTWARE
7.1. Drawing creation or change
7.2. Opening, creation, change and start
(list of programmes)
7.3. Failures signalling
7.4. Software functions
7.5. Millimetres / Inches
7.6. Import files from usb flash drive
7.7. Parameters for pc connection
SOFTWARE
CHAPT 8 WORKING CYCLE
8.1. Description of working cycle
WORKIN
G CYCLE
CHAPT 9 MAINTENANCE AND
RECOMMENDATIONS FOR
GOOD FUNCTIONING
9.1. Daily maintenance
9.2. Periodical maintenance
9.3. Recommendations for good
functioning
CHAPT 10 FAILURES AND SOLUTIONS
10.1. Failures and solutions
FAILURES AND
MAINTENANCE
To Next Page
Loading...