5. Select the device you want to connect.
Verify the pairing code on the screen
of your device and pairing device match,
then tap Connect to start pairing.
Note:
If the device that you want to add
does not appear on the screen, please
check if the device is turned on and
discoverable.
6. Tap Done to complete the pairing
connection.
Note:
- Most Bluetooth-enabled devices need to be paired with your tablet PC. The PIN
you enter on the tablet PC must be the same PIN to be entered on the other Blue-
tooth device.
- Once a partnership has been created, connecting to that device again will no
longer require entering the PIN.
- To disconnect from the Bluetooth-enabled device, select the device in the Blue-
tooth menu and tap Remove device.
To Next Page
Loading...
