TONEOHM 950 MULTILAYER SHORTS LOCATOR
OPERATOR MANUAL
POLAR INSTRUMENTS LTD. HARDWARE WARRANTY
1. Product Warranty. Product hardware is warranted to be free from defects in material and
workmanship during the Warranty Period (as defined below). Product hardware is warranted
to conform substantially to Polar’s then current (as of the date of Polar’s product shipment)
published user documentation during the Warranty Period. The Warranty Period is twelve (12)
months. Product support beyond these periods may be available at additional cost – consult
Polar for details.
2. Warranty Claims. Polar shall incur no liability under this warranty if the end user fails to
provide Polar with notice of the alleged defect during the applicable Warranty Period and
within seven (7) days of delivery to end user or, if the defect would not have been reasonably
apparent on inspection, within seven (7) days of its discovery by end user. After receiving such
notice, Polar will notify the purchaser of its designation of one of the following problem
resolution methods:
Return to Factory: The allegedly defective goods must be returned to Polar within
seven days of Polar’s notice and in accordance with Polar’s instructions advised at the
time.
Other: Polar will use commercially reasonable efforts to repair, correct or work
around the problem by means of telephone support or other means reasonably
determined by Polar.
Polar shall incur no liability under this warranty if Polar’s tests disclose that the alleged defect
is due to causes not within Polar’s reasonable control, including alteration or abuse of the
goods. Under the Return to Factory alternative, if a Product is determined not to be defective
or to have a defect due to causes not within Polar’s reasonable control, Polar reserves the
right to apply a processing charge.
3. Damage in Transit. End user must notify Polar and the carrier of any claim for damage in
transit within two (2) days of receipt of the damaged merchandise. Failure to do so may result
in the carrier and/or Polar refusing to accept liability in which case end user must pay the
purchase price as if the hardware had been delivered without damage.
4. Polar’s Liability Polar’s liability, and end user’s sole and exclusive remedy, shall be limited to
the express remedies set forth in this Polar Hardware Warranty.
5. Disclaimer of Warranties. POLAR MAKES NO OTHER WARRANTIES, EXPRESS, IMPLIED
OR STATUTORY, REGARDING PRODUCTS. ALL OTHER WARRANTIES AS TO THE
QUALITY, CONDITION, MERCHANTABILLITY, FITNESS FOR A PARTICULAR PURPOSE,
OR NON-INFRINGEMENT ARE EXPRESSLY DISCLAIMED.
6. Limitation of Liability. POLAR SHALL NOT BE RESPONSIBLE FOR DIRECT DAMAGES IN
EXCESS OF THE PURCHASE PRICE PAID BY THE END USER OR FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGE, INCLUDING, BUT NOT
LIMITED TO, LOSS OF PROFITS OR DAMAGES TO BUSINESS OR BUSINESS
RELATIONS, WHETHER OR NOT ADVISED IN ADVANCE OF THE POSSIBILITY OF
SUCH DAMAGES, THE FOREGOING LIMITATIONS SHALL APPLY, NOTWITHSTANDING
THE FAILURE OF ANY EXCLUSIVE REMEDIES.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...